WATER COOLING SYSTEM
In this method, cooling water jackets are provided around the cylinder, cylinder head,valve seats etc.The water when circulated through the jackets,it absorbs heat of combustion.This hot water will then then be cooling in the radiator partially by a fan and partially by the flow developed by the forward motion of the vehicle.The cooled water is again recirculated through the water the water jackets.
Types of Water cooling system :
There are two types of water cooling system.
1. Thermo siphon system:
In this system the circulation of water is due to difference in temperature (i.e. difference in densities) of water.So, in this system pump is not required but water is circulated because of density difference only.
2. Pump Circulation system:
In this system circulation of water is obtained by a pump.This pump is driven by means of engine output shaft through V-belts.
Types of Water cooling system :
There are two types of water cooling system.
1. Thermo siphon system:
In this system the circulation of water is due to difference in temperature (i.e. difference in densities) of water.So, in this system pump is not required but water is circulated because of density difference only.
2. Pump Circulation system:
In this system circulation of water is obtained by a pump.This pump is driven by means of engine output shaft through V-belts.
Materials of Water cooling machine :
Filter cape, Thermostat valve, House pipe, Water jaket around the cylinder, Cylinder,Water pump, Drain tap, Radiator tubes, Lower tank, Fan, Bypass pipe, House Oipe.
0 comments:
Post a Comment
Please do not enter any spam link in the comment box.